Name: Nuvola 3 by Zenit
Brand: Zenit
SKU: LTC8LC186

Question 1

Is the stone pattern photorealistic?

Accepted Answer

No — Nuvola 3 is intentionally abstract. The pattern references natural stone formations but doesn't attempt photorealistic reproduction. This gives it a contemporary, artistic quality that ages better than imitation stone.

Question 2

What solid colors pair well with Nuvola 3?

Accepted Answer

Blanco, Cashmere, Gris Nube, and Antracita all pair naturally with Nuvola 3. The key is to let the patterned panel be the focal point and use solid colors for the majority of cabinetry.

Question 3

Is the pattern consistent panel to panel?

Accepted Answer

As a printed pattern on lacquered MDF, Nuvola 3 is consistent and repeatable — unlike natural stone where each slab is unique. This makes it practical for large-scale applications.

Question 4

What panel sizes does Zenit offer?

Accepted Answer

Zenit panels by Alvic are available in 1220 × 2750mm (48" × 108¼") format at 19mm (¾") thickness. Panels are single-sided with a supermatte anti-fingerprint lacquer finish and color-matched backing. The oversized height (taller than standard 8' panels) allows full-height European cabinetry without horizontal seams in tall pantry and wardrobe units.

Question 5

What edge banding options are available for Zenit panels?

Accepted Answer

Zenit panels pair with supermatte color-matched ABS edgebanding: 1mm × 23mm texture-matched for production edgebanders. 0.4mm × 23mm pre-glued for iron-on application. The edgebanding matches the panel's anti-fingerprint supermatte texture. PUR glue is recommended for a seamless zero-joint appearance. Alvic LaserEdge technology is also compatible.

Question 6

Are Zenit panels suitable for kitchen cabinets?

Accepted Answer

Yes. Zenit supermatte panels are specifically designed for kitchen applications. The anti-fingerprint surface is a major practical advantage — fingerprints and smudges don't show, even on dark colors that would reveal every touch in a gloss finish. The thermal self-healing property means light surface scratches can disappear with gentle warmth. Panels are not rated for direct hot-pan contact. Edges should be sealed to protect the MDF core from moisture.

Question 7

How do I clean and maintain Zenit panels?

Accepted Answer

Daily cleaning: wipe with a soft damp microfiber cloth and mild detergent. The anti-fingerprint surface resists smudges, but any marks clean easily. For stubborn stains, use diluted isopropyl alcohol on a soft cloth. Light micro-scratches may self-heal — place a warm (not hot) damp cloth on the area for 30 seconds. Avoid abrasive cleaners, scouring pads, acetone, and bleach. Do not use steam cleaners. Dry after cleaning.

Question 8

What certifications do Zenit panels carry?

Accepted Answer

Zenit panels by Alvic are E1 compliant per EN 717-1, CARB Phase 2 compliant, and CE certified. Manufactured in Alcaudete, Spain by Alvic — one of Europe's largest producers of lacquered and supermatte panels. Alvic holds ISO 14001 (environmental) and ISO 9001 (quality) certifications. The supermatte anti-fingerprint technology is Alvic's proprietary development, refined over 20+ years of lacquered panel manufacturing.

Nuvola 3

Specifications

Applications