Name: Natural Oak by Shinnoki
Brand: Shinnoki
SKU: natural-oak
Price: 35.00 USD
Availability: InStock

Question 1

Is Natural Oak the same color as raw European oak?

Accepted Answer

Very close. Natural Oak preserves the true color of European oak with a clear UV-cured coating that does not add warmth or cool the tone. The result is a honey-gold color with the natural variation you would expect from real timber — slightly warmer than white oak, slightly cooler than American red oak.

Question 2

Does Natural Oak require any maintenance?

Accepted Answer

No special maintenance is required. The UV-cured matte finish is sealed and cured at the factory, so the surface does not need oiling, waxing, or periodic re-coating. Clean with a soft damp cloth. Avoid abrasive cleaners or scouring pads that could damage the matte surface.

Question 3

How scratch-resistant is Natural Oak?

Accepted Answer

The UV-cured coating provides good resistance to everyday scratches and scuffs. It outperforms raw oiled wood significantly. For areas subject to heavy wear, such as commercial reception desks, consider pairing with protective edge profiles. The matte surface also hides minor surface marks better than gloss finishes.

Question 4

What panel sizes does Shinnoki come in?

Accepted Answer

Shinnoki panels are manufactured in a single standard size: 2790 × 1240 × 19mm (approximately 4' × 9' × ¾"). They are available in two constructions — Exclusive (double-sided, with real wood veneer on both faces, packed 15 panels per unit) and Premium (single-sided, with real wood veneer on the face and a color-matched technical veneer on the back, packed 25 panels per unit). A flexible laminate version (1mm thick real wood veneer on phenolic resin backing) is also available in two sizes for wrapping curved surfaces and applying to custom substrates.

Question 5

What edge banding options are available for Shinnoki finishes?

Accepted Answer

Each Shinnoki finish is available with two types of matching edge banding. Real wood veneer edgebanding comes in 0.6mm thickness, available in 24mm or 48mm widths on 100-meter rolls — these are prefinished and color-matched but not pre-glued. ABS edgebanding comes in 1mm thickness, also in 24mm or 48mm widths on 50-meter rolls — these are color and structure matched and work well for high-use applications. When using veneer edgebanding, your edge bander should be set to 0.5mm to avoid cutting through the veneer into the MDF core.

Question 6

Is Shinnoki prefinished veneer durable enough for kitchen cabinets?

Accepted Answer

Yes. Shinnoki panels are finished with a six-layer UV-cured acrylate urethane lacquer system that delivers top-tier performance. They achieve EN 438-2 Class 5 scratch resistance (the highest class), EN 14354 wear resistance rated at 600 turns, and EN 438-2/20 impact resistance of 4N or higher. The extra-matte finish also resists fingerprints, dust visibility, and minor surface marks. These panels are used in luxury residential kitchens, commercial hospitality projects, and high-end retail environments worldwide.

Question 7

How do I clean and maintain Shinnoki panels?

Accepted Answer

Day-to-day cleaning is simple: wipe with a soft, dry cloth or a slightly damp cloth. For tougher stains, use a mild detergent — never acetone or ethyl butyl acetate. Wipe spills immediately rather than letting them sit. The factory-applied UV lacquer system means there is no on-site finishing required and no periodic re-coating needed. The prefinished surface is designed to maintain its appearance over years of normal residential use without additional treatment.

Question 8

What certifications does Shinnoki carry for green building projects?

Accepted Answer

Shinnoki panels carry an extensive range of environmental certifications. They are FSC and PEFC certified through Decospan's chain-of-custody program, CARB II compliant (California Air Resources Board Phase 2), and manufactured with No Added Formaldehyde (NAF). They meet CDPH Section 01350 indoor air quality standards and comply with the Lacey Act for timber legality. The UV-cured lacquer system is 99.5% solids with virtually zero VOC emissions during application. An Environmental Product Declaration (EPD) and full Life Cycle Assessment (LCA) documentation are available. For LEED projects, Shinnoki panels can contribute to MR Credit 1 (Building Reuse) and IEQ Credit 4.4 (Low-Emitting Materials).

Natural Oak

Specifications

Applications